Tech question for Ralph

[Rockin]

I will be running dual quads this year. 2 - 750 cfm edelbrock performers. I have a 1 to 1 linkage set up. The carbs close themselves by design.
I have 1 double return spring connecting to the back carb. Do I need to put a return spring on the front carb as well?

[rpsquared]

Yes no matter what both carbs need additional return springs other than the OEM Spring. I would move the double spring to the linkage then that would cover it...
Hope this helps

[Rockin]

The double spring I installed goes to the linkage on the back carb.
But I still need to add another double spring to the front carb?

[rpsquared]

Ron, I will look at it tonight and see what we need to do, but should be ok